Twin Screw Dyer-free Vented PET, PLA Sheet Extrusion Line
Features
Product Details
JWELL develops the parallel twin screw extrusion line for PET,PLA sheet, this line equipped with degassing system, and no need drying and crystallizing unit. The extrusion line has the properties of low energy comsuption, simple production process and easy maintenance. The segmented screw structure can reduce the viscosity loss of PET,PLA resin, the symmetrical and thin-wall calender roller highten the cooling effect and improve the capactity and sheet quality. Multi components dosing feeder can control the percentage of virgin material, recycling material and master batch precisely, the sheet is widely used
for thermoforming packaging industry.

Main technical parameters
| Model | Multi layer | Single layer | Highly-efficient |
| Extruder specification | JW75&36/40-1000 | JW75/40-1000 | JW95&52/44-1500 |
| Thickness of the product | 0.15-1.5mm | 0.15-1.5mm | 0.15-1.5mm |
| Main motor power | 110kw/45kw | 110kw | 250kw/55kw |
| Max extrusion capacity | 500kg/h | 450kg/h | 800-1000kg/h |
Note:The specifications are subject to change without prior notice.
Key words:
PP, PE Carbon Dioxide Supercritical Foaming Production Line
Other Products
ABS PE cold push sheet production line
ABS has excellent mechanical properties, its impact strength is good, and it can be used at lower temperatures. ABS has excellent wear resistance, good dimensional stability, and oil resistance, and can be used for bearings under moderate loads and speeds; HDPE has Good electrical properties, especially high dielectric strength of insulation, make it very suitable for wire and cable.
View MoreCRCC standard certified waterproofing membrane production line
Mainly used in the production of PE, EVA, ECB homogeneous, composite waterproof membrane, the product width is 2000——4000mm. The whole set of equipment is designed and manufactured under the framework of the CRCC certification standard of the Ministry of Railways, and according to the performance of the raw materials, combined with the grasp of the production process of waterproofing membranes for many years, the equipment has better operability and quality assurance.
View MoreTPO Waterproof Membrane Extrusion Line
The composite technology of solid rolls is adopted to make the wind resistance of domestic coils meet the standards of imported products. TPO waterproof roll material is a new type of waterproof roll made of thermoplastic polyolefin added with antioxidants, antioxidants, softeners, etc. material. TPO waterproof membrane has excellent weather resistance and flexibility. Mainly used in various roofing, basement, tunnel and other construction waterproof fields.
View MoreInquiry Now
Enter product details or other specific requirements to receive an accurate quote. We will reply within 24 hours.
Founded in 1997, Jwell Machinery is the vice president unit of China Plastics Machinery Industry Association, specializing in the production of plastic extrusion production lines, which are sold in more than 120 countries and regions around the world.
Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Tel: (+86)18751216188
Fax: +86-550-3167788
Postcode: 239000
Address: 218 Tongling West Road, Economic and Technological Development Zone, Chuzhou City
Contact Us
Follow Us
Copyright © 2022 CHUZHOU JWELL SHEET&PLATE&FILM INTELLIGENT MACHINERY CO., LTD. Powered by www.300.cn